View HFA08TB60SPBF_4172825.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

PD-96037
HEXFRED
Features

HFA08TB60SPBF
TM
Ultrafast, Soft Recovery Diode
(K)
BASE + 2
Reduced RFI and EMI Reduced Power Loss in Diode and Switching Transistor Higher Frequency Operation Reduced Snubbing Reduced Parts Count
Benefits
Ultrafast Recovery Ultrasoft Recovery Very Low IRRM Very Low Qrr Specified at Operating Conditions Lead-Free
VR = 600V VF(typ.)* = 1.4V IF(AV) = 8.0A Qrr (typ.)= 65nC IRRM = 5.0A
(N/C)
1
-
_ (A) -
3
trr(typ.) = 18ns di(rec)M/dt (typ.) = 240A/s
Description
International Rectifier's HFA08TB60S is a state of the art ultra fast recovery diode. Employing the latest in epitaxial construction and advanced processing techniques it features a superb combination of characteristics which result in performance which is unsurpassed by any rectifier previously available. With basic ratings of 600 volts and 8 amps continuous current, the HFA08TB60S is especially well suited for use as the companion diode for IGBTs and MOSFETs. In addition to ultra fast recovery time, the HEXFRED product line features extremely low values of peak recovery current (IRRM) and does not exhibit any tendency to "snap-off" during the tb portion of recovery. The HEXFRED features combine to offer designers a rectifier with lower noise and significantly lower switching losses in both the diode and the switching transistor. These HEXFRED advantages can help to significantly reduce snubbing, component count and heatsink sizes. The HEXFRED HFA08TB60S is ideally suited for applications in power supplies (PFC Boost diode) and power conversion systems (such as inverters), motor drives, and many other similar applications where high speed, high efficiency is needed.
D2 Pak
Absolute Maximum Ratings
Parameter
VR IF @ TC = 100C IFSM IFRM PD @ TC = 25C PD @ TC = 100C TJ TSTG Cathode-to-Anode Voltage Continuous Forward Current Single Pulse Forward Current Maximum Repetitive Forward Current Maximum Power Dissipation Maximum Power Dissipation Operating Junction and Storage Temperature Range
Max.
600 8.0 60 24 36 14 -55 to +150
Units
V A W C
www.irf.com
* 125C
1
10/07/05
HFA08TB60SPBF
Electrical Characteristics @ TJ = 25C (unless otherwise specified)
Parameter
VBR VFM IRM CT LS Cathode Anode Breakdown Voltage Max Forward Voltage Max Reverse Leakage Current Junction Capacitance Series Inductance
Min. Typ. Max. Units
600 1.4 1.7 1.4 0.3 100 10 8.0 1.7 2.1 1.7 5.0 500 25 V V A pF nH
Test Conditions
IR = 100A IF = 8.0A See Fig. 1 IF = 16A IF = 8.0A, T J = 125C See Fig. 2 VR = VR Rated TJ = 125C, VR = 0.8 x VR RatedD Rated See Fig. 3 VR = 200V Measured lead to lead 5mm from package body
Dynamic Recovery Characteristics @ TJ = 25C (unless otherwise specified)
Parameter
t rr trr1 trr2 IRRM1 IRRM2 Qrr1 Qrr2 di(rec)M/dt1 di(rec)M/dt2 Reverse Recovery Time See Fig. 5, 6 Peak Recovery Current Reverse Recovery Charge See Fig. 7 Peak Rate of Fall of Recovery Current See Fig. 8 During tb
Min. Typ. Max. Units
18 37 55 3.5 4.5 65 124 240 210 55 90 5.0 8.0 138 360 ns A nC A/s
Test Conditions
IF = 1.0A, dif/dt = 200A/s, VR = 30V TJ = 25C TJ = 125C IF = 8.0A TJ = 25C TJ = 125C V R = 200V TJ = 25C TJ = 125C dif/dt = 200A/s TJ = 25C TJ = 125C
Thermal - Mechanical Characteristics
Parameter
Tlead RthJC RthJA Wt Lead Temperature Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Weight
Min.

Typ.
2.0 0.07
Max.
300 3.5 80
Units
C K/W g (oz)
0.063 in. from Case (1.6mm) for 10 sec Typical Socket Mount
2
www.irf.com
HFA08TB60SPBF
100 1000
Reverse Current - IR (A)
TJ = 150C
100 10 1 0.1 0.01 0.001 0 100 200 300 400 500 600
TJ = 125C
Instantaneous Forward Current - IF (A)
10
TJ = 150C TJ = 125C TJ = 25C
T = 25C J
Reverse Voltage - V R (V)
1
Fig. 2 - Typical Reverse Current vs. Reverse Voltage
100
A
Junction Capacitance -CT (pF)
TJ = 25C
10
0.1 0.4 0.8 1.2 1.6 2.0 2.4 2.8 3.2
Forward Voltage Drop - V FM (V)
Fig. 1 - Maximum Forward Voltage Drop vs. Instantaneous Forward Current
1 1 10 100 1000
Reverse Voltage - V R (V)
Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage
10
Thermal Response (Z thJC )
D = 0.50 1 0.20 0.10 0.05 0.02 0.01 SINGLE PULSE (THERMAL RESPONSE) PDM t1 t2 Notes: 1. Duty factor D = t 1 / t 2 2. Peak T J = P DM x Z thJC + TC 0.0001 0.001 0.01 0.1 1
0.1
0.01 0.00001
t1, Rectangular Pulse Duration (sec)
Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics
www.irf.com 3
HFA08TB60SPBF
80 20 VR = 200V TJ = 125C TJ = 25C
I F = 16A I F = 8.0A
60
I F = 4.0A
15
IF = 16A
trr- (nC)
Irr- ( A)
I F = 8.0A IF = 4.0A
10
40
20
5
VR = 200V TJ = 125C TJ = 25C 0 100
di f /dt - (A/s)
1000
0 100
di f /dt - (A/s)
1000
Fig. 5 - Typical Reverse Recovery vs. dif/dt
500 VR = 200V TJ = 125C TJ = 25C 400
Fig. 6 - Typical Recovery Current vs. dif/dt
10000 VR = 200V TJ = 125C TJ = 25C
I F = 16A I F = 8.0A
I F = 16A
di (rec) M/dt- (A /s)
Qrr- (nC)
300
I F = 8.0A I F = 4.0A
1000
I F = 4.0A
200
100
0 100
di f /dt - (A/s)
1000
100 100
di f /dt - (A/s)
1000
Fig. 7 - Typical Stored Charge vs. dif/dt
4
Fig. 8 - Typical di(rec)M/dt vs. dif/dt
www.irf.com
HFA08TB60SPBF
3
IF
trr ta tb
4
REVERSE RECOVERY CIRCUIT
VR = 200V
0 Q rr
2
I RRM
0.5 I RRM di(rec)M/dt
5
0.01 L = 70H D.U.T. D G IRFP250 S
1
0.75 I RRM di f /dt
4. Qrr - Area under curve defined by trr and I RRM trr X IRRM Q rr = 2 5. di(rec)M/dt - Peak rate of change of current during t b portion of trr
dif/dt ADJUST
1. dif/dt - Rate of change of current through zero crossing 2. I RRM - Peak reverse recovery current 3. trr - Reverse recovery time measured from zero crossing point of negative going IF to point where a line passing through 0.75 IRRM and 0.50 IRRM extrapolated to zero current
Fig. 9 - Reverse Recovery Parameter Test Circuit
Fig. 10 - Reverse Recovery Waveform and Definitions
www.irf.com
5
HFA08TB60SPBF
D2PAK Package Outline
Dimensions are shown in millimeters (inches)
D2PAK Part Marking Information
T HIS IS A HFA08T B60S INT ERNAT IONAL RECT IFIER LOGO AS SEMBLY LOT CODE (N/C) (A)
6
(K)
PART NUMBER
DAT E CODE YY = YEAR WW = WEEK P = DESIGNAT ES LEAD-FREE PRODUCT (OPTIONAL)
www.irf.com
HFA08TB60SPBF
D2PAK Tape & Reel Information
Dimensions are shown in millimeters (inches)
Data and specifications subject to change without notice. This product has been designed and qualified for the Consumer market. Qualifications Standards can be found on IR's Web site.
IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information.10/05
www.irf.com 7

▲Up To Search▲

Price & Availability of HFA08TB60SPBF

	To Download HFA08TB60SPBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .